In tire manufacturing, equipment on mixing, calendering, extrusion, building and curing lines runs continuously, and mechanical parts need regular renewal. Emek Freze produces the parts used in this equipment, based on a technical drawing, a sample or an existing part.
Groups we produce regularly include drive and roller shafts, guide and tensioning rollers, piston components, bearing bushings and sleeves, connecting flanges and special mechanical parts. We can run machining, welded fabrication and, where needed, assembly within the same project.
Re-manufacturing of worn shafts and rollers by dimensioning, machining worn diameters back to size and repeat production needs are work we frequently carry out. Depending on the technical requirement, machining tolerances down to ±0.01 mm are possible.
Any work carried out for a specific customer is stated only to the extent it is explicitly presented in the References section. Every request is assessed against material, tolerance, quantity and lead-time criteria.
Our Production Capabilities for the Sector
- Mechanical part manufacturing for tire production-line equipment
- Manufacturing from a technical drawing or sample
- Machining, welded fabrication and assembly run together
- Re-manufacturing of worn shafts and rollers
- Flexible structure from single-part to repeat production
- Machining tolerances down to ±0.01 mm depending on the technical requirement
Parts and Solutions We Can Produce
- Drive and roller shafts
- Guide and tensioning rollers
- Piston and cylinder components
- Bearing bushings, sleeves and flanges
- Special mechanical connecting and transfer elements
- Parts renewed within maintenance and refurbishment
Share Your Production Need With Us
Send us your part, technical drawing or production need, and let's assess the right manufacturing approach for your application together.